MIL-M-80215
3. 4.7 Clamping devices. Levers or bolts for clamping the quill(s) and
arbors shall be furnished. The spindle carrier(s) shall have clamping de-
vices to clamp the carrier(s) to the column(s) when the carrier(s) is not
equipped with power vertical feed.
3.4.8 Safety stops. Means shall be provided to prevent overtravel during
power feed or rapid traverse of the table or hand feed of the spindle car-
rier. Safety devices shall be provided to prevent damage to the feed or
rapid traverse mechanisms if the moving parts are inadvertently fed or rapid
traversed into the safety stops.
3,5 Sizes and capacities. Sizes and capacities of the milling machines
covered by the specification shall be not less than requirements set forth
in Table I.
3.5.1 Vertical spindle travel and distance of centerline of spindle to
table top. The vertical spindle travel and maximum distance of centerline
of spindle to table top, Option A, B, C or D, shall be specified (see 6.2).
The option selected for spindle centerline distance to table top shall cor-
(Example: When Option A
respond to the same option for vertical travel.
is selected for vertical travel, the option for spindle centerline to table
top distance will automatically be A.)
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business