MIL-M-80215
2 arbor supports, Style B (Type I machines only)
1 arbor draw-in rod (Two sets when Type II machine is required)
1 set of pick-off spindle speed change gears (Two sets when Type 11
machine is required)
1 set of pick-off table feed change gears (Furnished only when ma-
chine function is required)
1 set of trip dogs
1 set of hand tools normally furnished by the manufacturer
3.13 Optional ecluipment. When required (see 6.2), the following optional
equipment and accessories shall be furnished.
3.13.1 Automatic program control. When specified (see 6.2), the machine
shall be provided with an automatic program control capable of directing
longitudinal table movement in either direction at rapid traverse rate
or feed rate, quill movement either in or out, and rise-and-fall action
on the spindle carrier. The program control shall have means for program-
ming each cycle with all directions of movements and rate of travel.
3.13.2 Tracer system. When required (see 6.2), a tracer system shall be
furnished. The tracing mechanism shall be hydraulically operated and
capable of controlling machine movement for precise duplication of tem-
plates. One-to-one relationships between the template and the workpiece
shall be maintained on finish cuts at all feed rates. The tracer mount-
ing bracket shall be attached to the table. The bracket shall be adjust-
able longitudinally to accurately position the tracer follower to the
template in relation to the cutter. The tracer stylus shall respond to
pressure light enough to permit the use of wood, plastic or other easily
worked template materials. The tracing head shall be of the automatic
depth control type and shall provide for disengagement of the tracer mechan-
ism when hand control of the table and spindle carrier movement is required
for conventional milling or setup purposes. When tracer system is furnished,
it shall comply with tolerances specified in Table II.
3.13.3 Additional optional accessories and equipment. Other optional ac-
cessories and equipment shall be furnished when specified (see 6.2).
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business